image - 2026-09-04T004552.456 (1)
CAT skid steer attachment working on a jobsite
The Mini Beak Skid Steer Attachment - Grapple Bucket Attachment
The Mini Beak Skid Steer Attachment - Grapple Bucket Attachment
The Mini Beak Skid Steer Attachment - Grapple Bucket Attachment
The Mini Beak Skid Steer Attachment - Grapple Bucket Attachment
The Mini Beak Skid Steer Attachment - Grapple Bucket Attachment
The Mini Beak Skid Steer Attachment - Grapple Bucket Attachment
image - 2026-09-04T004552.456 (1) CAT skid steer attachment working on a jobsite The Mini Beak Skid Steer Attachment - Grapple Bucket Attachment The Mini Beak Skid Steer Attachment - Grapple Bucket Attachment The Mini Beak Skid Steer Attachment - Grapple Bucket Attachment The Mini Beak Skid Steer Attachment - Grapple Bucket Attachment The Mini Beak Skid Steer Attachment - Grapple Bucket Attachment The Mini Beak Skid Steer Attachment - Grapple Bucket Attachment
The Beak - Grapple Bucket Attachment

The Beak Skid Steer Grapple Attachment

Built for concrete, logs, storm debris, and irregular loads, The Beak skid steer grapple attachment gives operators the gripping force and control needed for demanding material-handling work.

Its curved jaw opens 38 inches and delivers approximately 5,000 pounds of gripping force. The pointed lower fork reaches beneath slabs and bulky materials while the hydraulic upper jaw secures the load for lifting, sorting, positioning, and removal.

Whether you work in demolition, construction, land clearing, or storm cleanup, The Beak helps your skid steer handle materials that are difficult to control with a standard bucket or general-purpose grapple.

The Beak specifications

The Beak combines a compact working profile with the strength required for concrete, scrap, logs, and heavy debris. Its 46-inch overall width helps operators work in confined areas while maintaining control over irregular loads.

Review your machine’s mounting system, hydraulic configuration, and operating capacity before placing an order. OMNI Attachments can help confirm whether The Beak is the right match for your skid steer or compact track loader.

Specification Measurement
Overall width 46 in
Overall height 28 in
Overall fork width 26 in
Overall fork length 39 in
Jaw opening distance 38 in
Gripping force Approximately 5,000 lb
Cylinder stroke 12 in
Cylinder size 3 in
Material High-strength steel plate
Attachment weight 590 lb
Shipping weight 650 lb

Built for grip, control, and demanding work 

The Beak is designed for jobs where material shape, weight, and balance make handling difficult. Its jaw closes around uneven objects instead of relying on a flat bucket surface to keep the load in place.

That added control helps operators grip, lift, sort, and position material with fewer adjustments. Contractors can spend more time moving debris and less time chasing loads that roll, slide, or shift.

Approximately 5,000 pounds of gripping force

The hydraulic jaw produces approximately 5,000 pounds of gripping force to secure concrete, asphalt, logs, scrap, and other bulky materials. Its curved profile wraps around irregular loads and helps hold them during lifting and transport.

This gripping force is valuable during demolition and cleanup work, where broken material rarely has a flat or balanced shape. Operators gain more control when separating debris, loading trucks, or moving material through a congested jobsite.

A 38-inch jaw opening

A 12-inch cylinder stroke allows The Beak to open to its full 38-inch jaw capacity. The wide opening accommodates concrete chunks, logs, root material, and mixed debris that may be difficult to handle with a standard grapple.

The pointed lower fork can reach beneath slabs and other materials while the upper jaw closes around the load. This design supports controlled handling without forcing the operator to reposition the attachment after every attempt.

Heavy-duty hydraulic construction

The Beak uses a custom-built 3-inch cylinder held by 1¼-inch heat-treated pins. Its components are designed for the repeated opening, gripping, lifting, and loading cycles common in demolition and heavy material handling.

All hydraulic components are factory pressure tested before shipment. Flat-face couplings support a fast connection to compatible skid steers and help crews move from setup to work with less delay.

High-strength steel construction

The attachment is built from high-strength steel plate to withstand rugged jobsite conditions. Its structure supports repeated contact with concrete, scrap, wood, and other abrasive materials.

Durability matters when an attachment works around broken slabs and irregular debris every day. A rigid frame and protected hydraulic system help The Beak maintain dependable jaw movement and load control over time.

What can The Beak handle?

The heavy debris grapple is designed to handle materials that are bulky, uneven, or hard to secure with a bucket. Common examples include broken concrete, asphalt, logs, tree sections, scrap, construction debris, and storm-damaged material.

Material weight, balance, and machine capacity still determine how each load should be handled. Operators must follow the skid steer manufacturer’s rated operating limits and use the correct attachment configuration for the job.

Common applications include:

  • Concrete slab and foundation removal
  • Broken concrete and asphalt handling
  • Demolition debris sorting
  • Scrap and irregular material movement
  • Log and tree-section handling
  • Storm debris cleanup
  • Construction site cleanup
  • Land clearing and brush removal
  • Loading and material staging

Is The Beak compatible with your skid steer?

Attachment compatibility involves more than matching the mounting plate. Coupler style, auxiliary hydraulic capacity, attachment weight, machine operating capacity, and the material being handled all affect performance.

The Beak is designed to connect with compatible full-size skid steers and compact track loaders. Mounting options may be available for machines from Bobcat, CAT, Kubota, John Deere, Case, New Holland, Takeuchi, and other manufacturers, but compatibility should be confirmed by brand and model before ordering.

Use the Skid Steer Attachment Compatibility Guide to review the main compatibility factors. Bobcat operators can also visit OMNI’s Bobcat Skid Steer Attachments page for brand-specific information.

Send OMNI Attachments the following information for a compatibility review:

  • Machine manufacturer
  • Machine model
  • Model year
  • Coupler or mounting system
  • Auxiliary hydraulic specifications
  • Rated operating capacity
  • Primary material or application

Frequently asked questions about The Beak

These answers cover the main product, application, and compatibility questions contractors ask before requesting a quote. Machine specifications should always be reviewed before operating any hydraulic attachment.

Contact OMNI Attachments if your machine has a non-standard coupler or if you need help comparing attachment weight, hydraulic requirements, and rated operating capacity.

What is The Beak used for?

L
K

The Beak is used to grip, lift, sort, position, and move concrete, asphalt, logs, scrap, storm debris, and other irregular materials. Its design is suited to demolition, construction cleanup, land clearing, and heavy material handling.

The attachment is most valuable when the material cannot be held securely with a bucket or general-purpose grapple. Final suitability depends on the load, machine capacity, and operating conditions.

How much gripping force does The Beak provide?

L
K

The Beak provides approximately 5,000 pounds of gripping force. Its curved hydraulic jaw applies that force around uneven materials to help stabilize the load.

Gripping force does not replace the skid steer’s rated operating limits. Operators must account for attachment weight, load weight, load position, and the machine manufacturer’s instructions.

How wide does The Beak open?

L
K

The Beak has a 38-inch jaw opening supported by a 12-inch cylinder stroke. This opening allows it to wrap around concrete chunks, logs, and other bulky materials.

The actual material that can be handled depends on its shape, weight, balance, and the skid steer’s capacity. OMNI can review a specific application before purchase.

Does The Beak require hydraulic connections?

L
K

Yes. The Beak uses a hydraulic cylinder to open and close its jaw and includes flat-face couplings for connection to compatible skid steers.

Hydraulic flow and pressure requirements should be confirmed with OMNI Attachments before ordering. Provide your machine brand, model, and hydraulic specifications so the team can verify the correct setup.

How much does The Beak weigh?

L
K

The published product specifications list The Beak at 590 pounds, with a shipping weight of 650 pounds. Attachment weight must be included when calculating the machine’s available operating capacity.

Confirm the final weight if your order includes a customized mounting plate or other configuration changes. OMNI can provide the specifications for the attachment being quoted.

Will The Beak fit my skid steer?

L
K

Fit depends on the machine’s coupler, mounting plate, hydraulic system, rated operating capacity, and configuration. Many skid steers use common quick-attach systems, but this does not guarantee that every attachment is appropriate for every model.

Send OMNI your machine manufacturer, model, year, and hydraulic information for confirmation. You can also review the Skid Steer Attachment Compatibility Guide.

Can the mounting plate be customized?

L
K

The current product specifications state that the mounting plate can be customized to fit many skid steer brands. Available mounting options should be confirmed during the quoting process.

Tell OMNI which machine will operate the attachment before placing the order. This gives the team the information needed to recommend the appropriate mounting configuration.

Is financing available?

L
K

Financing options are available through the application link on this page. Approval, terms, and availability depend on the financing provider and applicant qualifications.

Contractors can request a product quote before applying. This provides the attachment configuration and pricing information needed for the financing process.

How do I request a quote?

L
K

Use the quote form on this page or call OMNI Attachments at (309) 204-0130. Include your contact information, machine brand and model, quantity, and primary application.

The additional machine details help the team review compatibility and prepare a more accurate recommendation. You can also ask about current lead times, shipping, mounting options, and financing.

The Beak vs. a standard grapple

A standard grapple works well with light brush, loose material, and loads that stack or balance with little effort. Concrete slabs, broken asphalt, logs, and mixed demolition debris create a different handling problem because their weight and shape can cause them to shift.

The Beak uses a pointed lower fork, curved upper jaw, 38-inch opening, and concentrated gripping force to control those difficult loads. Contractors can read the full skid steer grapple comparison to evaluate which design fits their work.

Job Requirement The Beak Standard General-Purpose Grapple
Concrete slab handling Designed for this application Performance varies by design
Irregular heavy debris Curved jaw secures the load May require repositioning
Access beneath material Pointed lower fork Varies
Approximate gripping force 5,000 lb Varies
Jaw opening 38 in Varies
Hydraulic operation Yes Depends on model
Best fit Concrete, logs, demolition and heavy debris Brush and general material handling

Industries that use The Beak

The Beak supports industries where crews must control heavy, awkward material under demanding conditions. Its jaw design makes it useful across several applications, but each industry uses that gripping capability in a different way.

These examples provide a starting point for selecting the attachment. Contractors can explore OMNI’s industry resources or contact the team to match The Beak with their machines, materials, and daily workload.

Demolition and concrete removal

As a skid steer demolition grapple, The Beak can grip concrete slabs, broken foundations, asphalt, scrap, and irregular debris. Operators can use it to separate material, clear work areas, load trucks, and position heavy pieces during tear-outs. Its pointed fork helps reach beneath material while the hydraulic jaw secures the load. This gives demolition crews a controlled way to handle debris after breaking or cutting work is complete.

Construction and site preparation

Construction crews can use The Beak to move rocks, bulky debris, wood, and other materials during site preparation or cleanup. Its grip is useful when the material cannot sit securely inside a standard bucket. The attachment can also support loading, staging, and sorting work around active construction sites. Better load control helps operators place material where it needs to go without repeated pickup attempts.

Storm cleanup and disaster recovery

Storm cleanup often involves trees, concrete fragments, damaged structures, and mixed debris in the same work area. The Beak gives operators one attachment for gripping and sorting several types of irregular material. Its controlled jaw movement helps crews separate recoverable materials, clear access routes, and load debris for removal. For more detail, see how contractors use The Beak for skid steer storm cleanup.

Land clearing and forestry

The Beak can grip logs, limbs, root material, brush, and storm-damaged trees during land-clearing work. Its curved jaw helps stabilize round and uneven loads that may roll or shift on standard forks. Operators working with longer logs can also ask about accessories designed to support specialized handling. OMNI can recommend a configuration based on the material, machine capacity, and worksite conditions.

Why contractors choose The Beak

The Beak is built around a specific jobsite problem: controlling material that is too heavy, uneven, or unpredictable for basic handling tools. Its geometry and hydraulic grip allow the attachment to reach beneath material and hold it through the lift.

For contractors, that can mean fewer pickup attempts, better positioning, and less need to switch attachments between gripping, sorting, and loading tasks. The result depends on the machine, operator, and material, but the attachment gives crews a purpose-built tool for demanding loads.

Contractors choose The Beak for:

  • Approximately 5,000 lb of gripping force
  • A 38-inch jaw opening
  • A pointed fork for reaching beneath slabs and debris
  • A custom-built 3-inch hydraulic cylinder
  • Heat-treated 1¼-inch cylinder pins
  • Factory pressure-tested hydraulic components
  • High-strength steel plate construction
  • Flat-face hydraulic couplings
  • Mounting options for compatible skid steers
  • Applications across demolition, construction, cleanup, and land clearing

Get The Beak for your skid steer

Tell OMNI Attachments what machine you operate and what materials you need to handle. The team can review compatibility, mounting options, hydraulic requirements, current lead times, and shipping before preparing your quote.

OMNI Attachments ships across the contiguous United States from Carlock, Illinois. Call (309) 204-0130 or complete the form to discuss the right setup for your work.

Get a Quote

This Attachment Is A Game Changer

The Beak